The Burgess Edge Router Bit ​System for Edge Banding Plywood

Customer Testimonial

"I use the Burgess edging system. I have two sets. one for 3/4” plys and another for 1/2” plys. This system is excellent for many applications. I use it when veneering over MDF. I can put the desired wood edging and then apply the veneer. This makes sure the edges are going to be strong and have much less possible chipping of the veneer through the years."

- John Ormsby
​Lumberjock

Unique and Superior Edgebanding

The Burgess Edge system is the only edgebanding system that employs the use of bearings to index the edge of both the plywood the natural wood insert. The Plywood bit excavates the inner plies on the edge of the plywood; its two bearings follow the surface veneer. The Insert Bit shapes a natural wood insert of the same species as the plywood veneer; its bearing follows the wood edge. The resulting edgeband resembles a jointed board in appearance and durability.​

Matched Pair for Fast and Easy Edgebanding

• Requires only a pair of router bits, not a dedicated machine
• Allows for multiple thicknesses of plywood and various edge treatments
• Self-aligns between plywood and insert
• Plywood veneer overlaps the infill on the edge so that the face of the plywood does not appear to be banded
• Uses wood that is normally scrapped. 
• Bearings follow both the top and bottom of the plywood. The veneer that is not cut out by the bit can approach a knife-edge, resulting in a finished appearance that resembles the edge of a natural board

burgessedge.com